MaxTow's Boost Bolt Thread Adapter for the 1998.5-2007.5 Dodge Ram 2500 & 3500 was made specifically for the 24 valve 5.9L Cummins to thread directly into the intake manifold. This boost bolt adapter allows you to easily install the sensor that is in
MaxTow’s ever-popular Diesel Boost Bolts have been expanded to include the GM 6.5L Diesel Boost Bolt Adapter, which makes it extremely easy to install a Boost Sensor or Boost Hose to any GM 6.5L Turbo Detroit Diesel Motor.
MaxTow's Banjo Bolt Adapter is specifically designed for the 1998.5-2010 Dodge Ram with a 24 Valve Cummins Motor. (Click the link below to view our online instructions) Dodge Ram Cummins 24 Valve Fuel Pressure Banjo Bolt Thread Adapter
MaxTow's 1994-1997 Dodge Ram 12 Valve Cummins Banjo Bolt Adapter replaces the stock banjo bolt and allows access to the injection pump for extremely accurate readings directly from the source.
MaxTow's 1/8 NPT Fuel Pressure Snubber Valve regulates, normalizes and eliminates fuel pressure spikes present throughout the fuel system during the initial ignition and start up of a diesel engine.
MaxTow’s Air Intake Heater Boost Plug is designed specifically for the 1999.5-2002 Ford Super Duty 7.3L Power Stroke and 2001-2004 6.6L GM Duramax and will allow you to easily read your truck’s boost levels without permanent modifications.
MaxTow's Fuel Pressure Thread Adapter is specifically designed for the Ford Super Duty 7.3L Power Stroke Diesel Engine. This thread adapter replaces the fitting in your pressure port on the fuel filter housing to install the sender.
MaxTow's Fuel Pressure Adapter Thread is specifically designed for the Ford Super Duty 6.0L Diesel Engine. This thread adapter replaces the fitting in your pressure port on the fuel filter housing to install the fuel pressure sender.
MaxTow's Fuel Pressure Adapter is specifically designed for the 2001-2017 GM Duramax 6.6L Diesel Truck. This adapter replaces the factory bleeder screw with an 1/8-27 NP adapter to easily install your fuel pressure sender. Thread Size: M10 – 1.5 to 1
MaxTow’s Fuel Adapter takes the effort out of installing a Fuel Pressure Sensor into a GM 6.5L Turbo Diesel.
MaxTow Fuel Rail Thread Adapters for Chevrolet GM LS Engines make it easy to install a 1/8-27 NPT fuel pressure sensor without major modifications.
MaxTow's 3/8” Fuel Line Fuel Pressure T-Fitting Adapter allows you to tee off the fuel line for reliable fuel pressure readings directly from the source.
MaxTow's Sensor Relocation Hose Kit repositions your gauge sensor from the harmful vibrations of the motor that could cause inaccurate readings to less active locations such as the firewall or fender well.
MaxTow's Transmission Test Port Extender is specifically designed for the 1994-2007.5 Dodge Ram. This Trans Test Port Sender Extender is required when installing any of our transmission temperature gauges into your 1994-2007.5 Dodge Ram Truck.
MaxTow’s Universal Transmission Test Port Extender allows access to the vehicle’s transmission test port to install a temperature sensor for extremely accurate readings directly from the source.
MaxTow's Dodge Ram Cummins Transmission Line T-Fitting Adapter allows you to easily install your 1/8-27 NPT transmission temperature sensor directly to the 1/2” transmission cooler feed line for extremely accurate readings directly from the source.
MaxTow's GM Allison 1000 Transmission Line T-Fitting Adapter allows the installation of a 1/8-27 NPT transmission temperature sensor directly onto the 5/8” transmission cooler feed line.
MaxTow's 3/8” Transmission Line T-Fitting Adapter allows you to install your 1/8-27 NPT transmission temperature sensor to the 3/8” transmission cooler feed lines for extremely accurate readings.
MaxTow Transmission Adapters for 6.7L Cummins Diesel Engines with a 68RFE Transmission make it easy to install a Transmission Temperature Sensor or Pressure Sensor without cutting into factory lines or making any major changes to your Ram truck.
MaxTow's 68RFE Transmission Filter Steel Screw for the 2007.5-2024 Dodge Ram replaces the plastic factory screw attached to transmission spin-on filters for the 6.7L Cummins.
MaxTow LS Swap Engine Adapters include (2) Adapters and (2) Washers, the fittings needed to install aftermarket gauges to an LS engine.
MaxTow’s Ford 6.0 & 7.3L Power Stroke Low Oil Pressure Gauge Sensor Thread Adapter allows you to install a 1/8-27 NPT sensor direc (Click the link below to view our online instructions) Ford 6.0L & 7.3L Power Stroke Low Oil Pressure Thread Adapters
MaxTow’s Fuel Pressure Big Line Kit for the 2nd Generation 1994-1998 Dodge Ram 2500/3500 upgrades the restrictive line and enables you to easily install a fuel pressure sensor for extremely accurate readings.
MaxTow’s Fuel Pressure Big Line Kit for the 1998.5-2007 Dodge Ram 5.9L Cummins 3/8” upgrades the restrictive line and enables you to easily install a fuel pressure sensor for extremely accurate readings.
MaxTow's 2007.5-2009 Dodge Ram 6.7L Cummins 3/8" Big Line Kit allows you to install your fuel pressure sensor to the injection pump inlet for extremely accurate readings directly from the source.
MaxTow 3/8" Fuel Pressure Big Line Kits for the 6.7L Cummins make it possible to gain access to the injection pump inlet for extremely accurate fuel pressure readings directly from the source.
MaxTow's Big Line Kit for the 6.7L Power Stroke replaces the hard fuel line between the secondary fuel filter and vapor control valve (VCV), allowing you to install a fuel pressure sensor in-line to the source.
MaxTow's High Pressure Oil Pressure HPOP Gauge Wiring Harness installs directly to the injection control pressure sensor (ICP) for a clean installation without having to splice into any factory wiring.
MaxTow's Fuel Rail Pressure Gauge Wiring Harness installs directly to the fuel rail pressure sensor for a clean installation without having to splice into any factory wiring.
MaxTow Expandable Circuits allow you to easily connect additional 12-Volt accessories to an existing fuse holder without the need for cutting or splicing your vehicle’s existing wiring.
Have all of the information needed to install your 6.7L Cummins Boost Bolt Adapter designed for MaxTow Boost Gauges? Our handy Install Guide walks you through the entire setup step-by-step. These Accessories are a great option for simplifying and spe
MaxTow's -4 AN Fuel Rail Adapter is designed to replace the Schrader valve on your fuel rail which allows you to easily install your fuel pressure sending unit.
MaxTow’s 1/2" Fuel Line Fuel Pressure T-Fitting Adapter allows you to tee off the fuel line for reliable fuel pressure readings directly from the source.
MaxTow's Boost T-Fitting Adapter allows you to avoid drilling and tapping into your intake manifold by cutting the MAP line and inserting the T-fitting in the two cut ends.
MaxTow's Fuel Pressure Banjo Bolt Adapter and 1/8-27 NPT Diesel Fuel Pressure Snubber Valve are now combined into one easy-to-use piece.
MaxTow's Fuel Pressure Banjo Bolt Adapter and 1/8-27 NPT Diesel Fuel Pressure Snubber Valve are now combined into one easy-to-use piece.
MaxTow’s Stone Snubber Valve works in the same way as our 1/8-27 NPT Fuel Pressure Snubber Valve, but instead uses a porous stone to prevent fuel pressure spikes.
MaxTow's Needle Valve helps you to eliminate fluctuations on your fuel pressure gauge by controlling and normalizing fuel pressure spikes.
This Ford 3.5L EcoBoost Fuel PSI adapter replaces the high-pressure feed port with one that has ports for a 1/8-27 NPT fuel sensor, making it easier to install the sensor and take readings.
MaxTow’s GM Duramax Allison 1000 Transmission Test Port Adapter allows you to easily install a 1/8-27 NPT temperature sensor to the test port of your 2000-2018 Chevrolet Silverado or GMC Sierra diesel truck.
MaxTow’s Transmission Test Port Adapter allows you to easily install a 1/8-27 NPT transmission temperature sensor into your 2011-2020 Ford Super Duty with a 6R140 Torqshift6 Transmission.
MaxTow Transmission & Oil Pan Temperature Sensor Adapter Kits make it easy to install a sensor directly into your car or truck’s transmission pan or oil pan to monitor oil temperatures.
MaxTow’s Version 2 Exhaust Gas Temperature (EGT) Bracket gives you the ability to install our EGT probes in your truck’s exhaust pipe without having to tap into the pipe.
MaxTow’s 1998.5-2007 Dodge Ram Water Temperature Sensor Adapter gives you the ability to easily install a water temperature sensor into your 24v 5.9L Cummins.
MaxTow Water Temperature Adapters for the 6.0 Power Stroke make it easy to install a water temperature sensor without making any major modifications to your Ford truck.
MaxTow's Coolant Adapter for the Dodge Ram 12-Valve Cummins gives you the ability to install a T-Fitting for a water temperature sensor on the thermostat bypass hose and read the coolant temperature of your P-Pump 12-Valve Cummins.
A tach filter may be necessary when any device utilizes a vehicle’s engine RPM pulse signal that is of less than optimal quality for instrument analysis.